-
DIY Ice dildo
So there’s a post on Husdom that my Sir thought was particularly interesting. It was a post about a DIY ice dildo. Well we made and thoroughly enjoyed it. I will warn you it is VERY cold. I could only handle it for a few seconds at a time but it made Sir’s warm cock feel amazing. I’ve needed his cock before but not like this I NEEDED it or else I would freeze. Mentally and physically it was very fun play. Well I made another one today but I took pictures for a detailed explanation of how we made ours. I posted all the pictures to my profile. Enjoy!
What you’ll need:
condom
dental floss
paper towel tube
scissorsStep 1:
cut small slits in the paper towel tube. Two on one end and one on the other. Or you could do one on each.Step 2:
Open and unroll condom. Fill with water. It should be stretched a little but not so much that it looks more like a water balloon than a thick cock. Tie off endStep 3:
Tie a length of floss between 10-12 inches long to the knot you just made.Step 4:
Slide floss through paper towel tube and gently pull the full condom through the tube. Take the end of floss and tie it off to the small cut in the end of the tube. If you want a straight dildo pull the tip all the way into the tube and place it in the freezer you’re all done. If you want a slight head on the dildo follow next stepStep 5: (optional)
Leave about one inch sticking out from end of paper towel tube. Gently wrap another piece of floss around condom right at end of tube. Tie off this piece of floss to the small cut on this end of the paper towel tube. It should be wrapped tight enough that it would unravel or slide off but not tight enough to pinch the condom when the water expands.Step 6:
Place in freezer wait 6-8 hours and enjoy!We decided to leave the condom on to avoid some of the mess but mess can be fun too 🙂
Log in to reply.